Quindrel
Quindrel
BilgeSentinel

BilgeSentinel™automatic bilge pump

$89.99

  • Submersible automatic bilge pump
  • Built-in float switch controls on and off
  • ABS747 housing with stainless steel shaft
  • Built-in filter and anti-fouling impeller

Option: 12v 750gph

FREE GIFT

Free Gift - Waterproof Phone Pouch

FREE
Tracked Shipping
  • Mount the pump low in the bilge with the included hardware.
  • Wire it following the quick-start guide.
  • The float switch follows the water level. The pump starts at the trigger point and stops by itself.
  • 1x BilgeSentinel Automatic Bilge Pump
  • Mounting Hardware Kit
  • Quick-Start Installation Guide
  • Printed FAQ & Troubleshooting Card

We offer free shipping on orders over $150. Once your order is dispatched, the estimated delivery time is 5 to 12 business days depending on your location — tracking is emailed as soon as it ships.

Changed your mind? You can return your product within 90 days of delivery for a refund — see our Returns page for the full policy.

Pump construction and how it switches

Pump Capacity

The pump has a flow capacity of 750 GPH and is used for bilge drainage on boats. Compare that figure with the size of your bilge and the layout of your boat when choosing a pump.

Float Switch

A built-in float switch follows the water level in the bilge. The pump starts when water reaches the trigger point and stops on its own once the water drops back down.

BilgeSentinel

Housing and Shaft

The housing is molded from ABS747 and the shaft is stainless steel. The pump sits low in the bilge, so these are the materials you will find in contact with bilge water.

Filter and Impeller

A built-in filter and an anti-fouling impeller are part of the pump. They are fitted for bilges where weeds, string and hair can collect and reach the moving parts.

Frequently Asked Questions

The built-in float switch rises and falls with the water in the bilge. At the trigger point the pump starts. When the level drops, the switch lowers and the pump stops without any input from you.

The housing is ABS747 and the shaft is stainless steel. The built-in filter and anti-fouling impeller complete the pump. Rinse and inspect it as part of your regular boat checks.

Mount it low in the bilge, at the point where water collects. Use the included mounting hardware and follow the quick-start guide for placement and wiring.

The mounting hardware kit and a quick-start installation guide come in the box. You will also need basic tools and the wiring supplies for your boat's electrical system. Follow the guide step by step.

The built-in filter and anti-fouling impeller are part of the pump's design for bilges with weeds, string and hair. Check the filter area for debris now and then and clear it by hand.

Short cycles are common after rain or rough water, because the float switch follows the level. If it keeps cycling, look for the source of the water in the bilge and check the float moves freely.

Yes. BilgeSentinel is a submersible pump, made to operate while sitting in bilge water. Mount it low so the float switch can follow the water level.

Lift the float switch by hand to confirm the pump starts. Look at the filter for weeds or string, and check the mounting hardware and wiring connections. Use the troubleshooting card if something looks off.

A bilge pump drains water that collects in the lowest part of a hull. BilgeSentinel is an automatic bilge pump that uses a built-in float switch to start when water rises and stop when the bilge is dry.

The package contains one BilgeSentinel automatic bilge pump, a mounting hardware kit, a quick-start installation guide and a printed FAQ and troubleshooting card. The submersible bilge pump mounts low in the bilge.
BilgeSentinel

Ready to make it yours?

Get BilgeSentinel at today's price with your free gift included — and a full 90 days to enjoy it.

Your free gift: Free Gift - Waterproof Phone PouchFREE
90-Day Money-BackTracked Shipping
Secure Checkout
Tracked Shipping
Customer Support
Loved by our customers

BilgeSentinel: An Automatic Bilge Pump for Boats

BilgeSentinel is an automatic bilge pump that mounts low in a boat's bilge, the lowest part of the hull where water collects. A built-in float switch monitors the water level, starts the pump and shuts it off when the bilge is dry.

This submersible bilge pump has an ABS747 housing and a stainless steel shaft. A built-in filter and an anti-fouling impeller are fitted to handle weeds, string and hair.

Common settings for a bilge pump for boat use include small to mid-size boats, dock slips and moorings. The automatic bilge pump ships with a mounting hardware kit, a quick-start installation guide and a printed FAQ and troubleshooting card.

  • Built-in float switch with automatic shut-off
  • Stainless steel shaft
  • Mounting hardware included

You may also like

NorthSweep

Electric Snow Shovel

NorthSweep

$279.99

GaleHawk

Handheld Gas Blower

GaleHawk

$229.99

JetPulse Pro

Power Washer For Home Use

JetPulse Pro

$199.99

WashForge

Pressure Washer

WashForge

$179.99

Free gift included