Quindrel
VertexGauge

VertexGauge™ angle finder protractor

$79.99

  • Mechanical lock holds the angle while you mark and cut
  • 0.1-degree LCD steps, so no squinting at a printed scale
  • Backlit screen reads in a dim garage or job site
  • Long arm carries a corner angle to trim and your saw

FREE GIFT

Free Gift - Mini Aluminum Spirit Level

FREE
Tracked Shipping
  • Set the arm flush against the edge or corner of your workpiece.
  • Read the angle on the backlit LCD, or press HOLD to freeze the number.
  • Engage the mechanical lock, then carry the angle to your saw or marking line.
  • 1x VertexGauge Digital Angle Finder
  • 1x User Manual
  • Battery not included

We offer free shipping on orders over $150. Once your order is dispatched, the estimated delivery time is 5 to 12 business days depending on your location — tracking is emailed as soon as it ships.

Changed your mind? You can return your product within 90 days of delivery for a refund — see our Returns page for the full policy.

What VertexGauge gives you at the bench

Digital angle readout

Reading a printed scale on a protractor invites mistakes. The LCD shows the angle as a number in 0.1-degree steps, across a range of 0 to 225 degrees, so you read it straight off the screen.

Mechanical angle lock

An angle that shifts when you lift the tool is a problem when you move from the corner to the saw. The mechanical lock holds the arm in place while you mark and cut.

VertexGauge

Backlit display

Dusty garages and dim job sites make a plain screen hard to read. A built-in backlight lights the digits, so you can check the angle without moving to a window or a work lamp.

Auto shut-off and low-power alert

A tool left on drains its battery between jobs. VertexGauge powers down on its own when idle, and a low-power alert shows as the battery runs down, so you can swap it between tasks.

Frequently Asked Questions

It measures from 0 to 225 degrees and shows the result in 0.1-degree steps. That covers tight joints, wide bevels and the angles in between.

Yes. Along with digital angle measurement, it has horizontal and vertical spirit level functions, so you can use the same tool to check level and plumb as well as angles.

It runs on a battery, which is not included in the box. It powers down on its own when idle, and a low-power alert appears when the battery is running down.

Yes. The long arm is made for carrying angles onto trim and crown molding. Set it at the corner, lock it, then take that angle to your miter saw.

It holds the arm at the angle you found. You can move away from the corner to mark or cut without the arm shifting, then read the angle again whenever you need.

You get one VertexGauge Digital Angle Finder and one user manual. A battery is not included, so have one ready before first use.

Press the HOLD button to keep the number on the screen. You can also turn the mechanical lock to hold the arm in place while you mark.

The whole tool measures 400mm, about 16 inches, in length. That is the reach you have for carrying an angle from a corner to your cut line.

Yes. The LCD is backlit, so the reading stays visible in dusty garages and dim job sites. It is a digital angle finder protractor with auto shut-off and a low-power alert.

The angle is read at the corner with the arm flush against the workpiece, held with the mechanical lock, then carried to the miter saw, so it works as a miter saw protractor for trim.
VertexGauge

Ready to make it yours?

Get VertexGauge at today's price with your free gift included — and a full 90 days to enjoy it.

Your free gift: Free Gift - Mini Aluminum Spirit LevelFREE
90-Day Money-BackTracked Shipping
Secure Checkout
Tracked Shipping
Customer Support
Loved by our customers

VertexGauge: An Angle Finder Protractor for Saw and Trim Work

An angle finder protractor with a lock lets a corner angle travel to the miter saw on the tool rather than in memory.

VertexGauge pairs a digital LCD with a one-touch mechanical lock. The arm sits flush against the workpiece edge, the angle shows on screen, and the lock holds it while the cut line is marked. Readings run from 0 to 225 degrees in 0.1-degree steps.

Set once at the corner, the angle goes straight to the saw, so it works as a miter saw protractor for trim work. As a digital angle gauge, it also offers horizontal and vertical spirit level functions.

  • The backlit display keeps the reading visible in dusty garages and dim job sites.
  • A HOLD button freezes the reading digitally, besides the physical lock.
  • Auto shut-off and a low-power alert are built in; the battery is not included.

Related guides